Epson ET-2800 Driver

The Epson EcoTank ET 2800 printer is the best choice that can be used at home and in a small office. The Epson ET 2800 is here to assist you in taking care of your daily printing needs. This printer stands for quality and efficiency. The Epson printer comes with an all-in-one feature that allows you to print, scan, copy, and fax. Once the Epson ET-2800 printer initial setup is completed, drivers will need to be downloaded and installed. To assist you with the Epson connect printer setup and installation, we have created a few simple steps to assist you in the process. If you think that you would require assistance, contact us to help you further.

Talk to Us !

epson et 2800 driver

Epson ET-2800 For Windows Supported OS

Windows 11, Windows 10 32-bit, Windows 10 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit, Windows Vista 32-bit, Windows Vista 64-bit, Windows XP 32-bit, Windows XP 64-bit

Download

Epson ET-2800 For Mac Supported OS

macOS Big Sur 11.x, macOS Monterey 12.x, Mac OS Catalina 10.15.x, macOS Mojave 10.14.x, macOS High Sierra 10.13.x, macOS Sierra 10.12.x, Mac OS X El Capitan 10.11.x, Mac OS X Yosemite 10.10.x, Mac OS X Mavericks 10.9.x, Mac OS X Mountain Lion 10.8.x, Mac OS X Lion 10.7.x, Mac OS X Snow Leopard 10.6.x, Mac OS X Leopard 10.5.x

Download

Epson ET-2800 First Time Printer Setup

Complete the following steps when you get the brand new Epson ET-2800 printer

  • Open up the brand new printer and place it in the right place.
  • Remove all the protective materials.
  • Now, power up the printer using the power cord.
  • Fill in the tanks and load the paper tray with paper.
  • Move over to the device and open the Epson Support page – epson.ca/support/et2800.
  • Enter the details of the printer – Epson ET 2800.
  • Note that the OS should be selected correctly – Windows or Mac OS.
  • Download and install the driver. Connect to a wireless network.

The process is complete, and you can begin using your Epson EcoTank ET 2800.

Epson Printer setup

Epson ET-2800 Driver Download

To be able to use the Epson EcoTank ET 2800 to its full capacity, a driver has to be downloaded. Note that the information that is entered is accurate to download the right driver.

Epson ET-2800 driver-Windows

Here are the steps that will assist you in downloading and installing the Epson EcoTank ET 2800

  • Turn on the Epson EcoTank ET 2800 and device.
  • Make sure there is a stable wireless connection.
  • Note that all three devices should be placed close to each other.
  • On the computer, open the Epson Support Page.
  • Enter details – Epson EcoTank ET 2800 and Windows OS.
  • Choose the right driver and download it – epson.ca.
  • Complete the installation by following all instructions.
  • Connect to a network using the wireless option as prompted.

With this, the download and installation of the Epson EcoTank ET 2800 are complete.

Epson ET-2800 Driver-Mac

Follow the steps to complete the installation of the driver for the Epson EcoTank ET 2800 and Epson connect printer setup for mac.

  • Power up the Mac and the Epson EcoTank ET 2800 printer.
  • Check if there is an active internet connection.
  • On the device, open the Epson Support page.
  • Key in the details of the printer.
  • The details are Epson EcoTank ET 2800 and Mac OS.
  • Choose a driver, an all-in-one driver from the given list.
  • Download – epson.ca and begin the installation.
  • Run the file and complete all instructions on the screen.
  • Then connect to a wireless network. Enter the details, and it is done.

Give the printer a test print to ensure the process is completed.

Epson ET-2800 Wireless Setup

Connect Epson ET 2800 Printer to Wi-Fi

  • Power up the Epson EcoTank ET 2800 printer.
  • Check the WiFi connection. It should be stable.
  • Note the WiFi’s credentials for later.
  • Move over to the control panel. Select the wireless network.
  • Then choose the WiFi option that will lead you to Wireless Setup Wizard.
  • Complete the instructions. Choose the desired wireless network.
  • Key in the details of the WiFi, such as a password to access the connection.
  • Within a few seconds, the connection will be established.
  • Follow the Epson ET-2800 Troubleshooting instructions to resolve the issue if the printer displays an offline error.

Connect Epson ET 2800 Printer to Router

  • Use this step to connect the Epson EcoTank ET 2800 directly to the router.
  • Turn on the Epson EcoTank ET 2800 printer.
  • Check if there is an active wireless connection.
  • Locate the WPS button on the printer, you will find it at the back.
  • Look for the WPS push button on the WiFi router as well.
  • Note that these buttons have to be pressed together at the same time.
  • This will cause the connection to establish.
  • Repeat the process a few times if you must.

In case the printer shows offline error after completing the wireless setup process, follow the Epson ET-2800 Troubleshooting steps to solve the issue.

If the steps above have not assisted in any way you have the option of contacting our team to help provide their services.

Call Now !

Epson ET 2800 Connect Printer setup Utility

Once the physical setup is complete, a driver will have to be downloaded. Choose the all-in-one driver, but you can download drivers for specific purposes as well. Follow the instructions below to help in the epson connect printer setup utility process.

Epson ET 2800 Scan Utility

  • Turn on the Epson EcoTank ET 2800 printer and the device.
  • Make sure the connection is stable to be able to connect.
  • On the device, enter the details for the Epson Printer Support in a search engine.
  • On the website, enter details of the Epson EcoTank ET 2800 printer.
  • The details are Epson EcoTank ET 2800 and Windows OS or Mac OS.
  • A list of drivers will show up. Choose The Scan Utility driver.
  • Download – epson.com support and install it by following all the instructions.

To access the Scan Utility option, open the driver and choose Scan. With this, you can begin using the driver to scan.

Epson ET 2800 Fax Utility

  • Ensure that Epson EcoTank ET 2800 is powered up.
  • Do the same for the device as well.
  • On the device, enter the details to open the Epson Support Page.
  • Enter details of the Epson printer setup like the name – Epson EcoTank ET 2800 and OS.
  • Complete the download and installation using Epson ca support.
  • Follow the on-screen instructions.
  • After the driver is installed, open it and select the utility tab.
  • Proceed to select Fax.

Epson Event Manager Software ET 2800

The Epson Event Manager Software is put into place to smoothen the process of scanning documents. To begin using the Epson Event Manager Software you will have to download and install it on the device. Follow the instructions below to assist you in the process. This also gives you the advantage of adding a task key to allow the scan to take place with just one tap.

Epson Printer Support

How do I install Epson Event Manager Software ET 2800

Follow the instructions of the Epson Event Manager Software for Epson EcoTank ET 2800

  • Open the Epson Support page on the device and download the Epson Event Manager Software.
  • Complete the installation after following the instructions.
  • It is advisable to restart the system.
  • On the device, open programs and then choose the Event Manager.
  • Then, select Epson Scan.
  • Move over to the Control Panel and then choose Devices and Printer. Then, click properties and choose the Event Tab.
  • Choose Scan and apply it

Check the Epson Event Manager Software feature by taking your first scan.

Epson ET 2800 Scanner Setup

Epson ET-2800 Scan to computer

  • Take the document and place it on the glass scanner.
  • Make sure the document is aligned well.
  • Then click on Scan, followed by Ok.
  • Choose the file to be saved in the desired location.
  • Select the format type – jpeg or pdf.
  • Once all the settings are made, click scan again.
  • The document will now be saved in the designated folder.

Epson ET-2800 Scan multiple pages

  • To be able to scan multiple pages you will have to download the Epson Scan Software.
  • Open the software and select – Multiple pages from the format menu.
  • Ensure to make changes and click Scan and then OK.
  • Follow the other instructions on the screen.
  • Then click Scan again.
  • With this, the document will begin scanning and will be saved as a single pdf file.

Epson ET-2800 Scan to emails

  • Keep the desired document on the glass scanner.
  • Align it accurately. Then choose the control panel.
  • Make all the necessary settings based on your preference.
  • The settings will be made before the process of installation.
  • Click the start option and then setup.
  • Select the file type – pdf or jpeg.
  • Then click scan again and complete the scan process.

Epson ET-2800 Scan driver

  • To begin this process, complete the download and the scan driver.
  • To complete this, Download the driver from the Epson support Canada website.
  • Then open the scan driver and make all the necessary settings.
  • Click on Scan and then OK.
  • The file can be located in the designated driver.

DMCA.com Protection Status