Epson WF 2930 Driver

Epson WF 2930 is an all-in-one compact and stylish printer with A4 2-sided printing and borderless printing features. It supports printing from anywhere via Epson’s mobile printing solutions. The WF 2930 printer supports AirPrint as well. Its resolution is 4800 x 1200 dpi for printing and uses an Epson Micro Piezo print head as the printing method.
The Epson WF 2930 printer is compatible with Copy, Scan, and Print. It uses Cyan, Magenta, Black, and Yellow color ink cartridges. The paper tray capacity of this printer is a maximum of 150 sheets.
Now, on this page, you will get to know how to set up the Epson WF 2930 printer. Additionally, know how to do driver setup, wifi setup, and other essential utility setups.

Epson WF 2930 First-Time Printer Setup

The simple steps for Epson WF 2930 first-time printer setup are:

  • Unpack the Epson WF 2930 printer box and get the printer.
  • Keep the Epson printer in a safe place close to the wall port.
  • Tear off the covering materials from the inner and outer sides of the printer.
  • Ensure the printer does not have any problem and get a new USB cord.
  • Tear off the coverings from the USB cord and connect one end to the WF printer.
  • Connect another end of the cord to the wall port and power up the wall port.
  • Power up the Epson WF 2930 printer and open its cartridge slots.
  • Load new ink cartridges into the slots after removing their coverings.
  • Close the slots, open the paper tray, and load a new set of papers in the tray.
  • Now, close the tray and access the Mac or Windows operating system.
  • Power up the computer and download the compatible Epson WF 2930 driver on it.
  • Install the Epson WF 2930 printer driver using the on-screen steps.
  • Lastly, print a document to ensure an accurate Epson WF 2930 printer setup.
Epson Printer setup

Epson WF 2930 Driver Download

Download Epson WF 2930 and install it on the Windows or Mac computer using the below procedure.

Epson WF 2930 Driver – Windows

The simple instructions for Epson WF 2930 driver installation on the Windows device are:

  • ON the Windows device and make sure it is flawless.
  • Search and find the Epson WF 2930 driver compatible with the device.
  • Download the WF printer driver setup file and click on it twice.
  • Now, use the set of instructions displayed on the screen.
  • Select the method to make a connection between the Windows OS and the printer.
  • Continue and finish the Epson WF 2930 driver setup process.

Epson WF 2930 Driver Installation for Mac

The basic method for installing the Epson WF 2930 driver on the Mac device is:

  • Switch ON the Mac operating system and ensure it is stable.
  • Search and save the Epson WF 2930 driver suitable for the Mac OS version.
  • Double-click on the driver setup file to begin the installation process.
  • Carry on with the set of instructions shown on the Mac device screen.
  • Choose a mode for connecting the WF 2930 printer and Mac OS.
  • Carry on and complete the Epson WF 2930 driver installation.

Epson WF 2930 Wireless Setup

Connecting the Epson WF 2930 printer and the wireless network is easy. The standard instructions for Epson WF 2930 wireless setup are:

Connect Epson WF 2930 Printer to Wi-Fi Network

The procedure for connecting the wifi network and Epson WF 2930 printer is:

  • Power up the preferred computer you would like to connect to the WF printer.
  • Make sure the wifi network is stable on the computer.
  • Place the wireless router close to the Epson WF 2930 printer.
  • Access the printer panel and select the displayed Setup option.
  • Choose the network setup menu and access the wifi settings option.
  • Select your network name from the list of wifi networks shown on the screen.
  • Continue with the wizard instructions and enter the wifi network passcode.
  • Proceed and finish the Epson WF 2930 wireless setup.
  • At last, you are done with the Epson WF-2930 Troubleshooting page to elevate the printer access.

Connect Epson WF 2930 Printer to Router

The simple steps for making a connection between the router and the WF 2930 printer are:

  • Check and ensure the Epson WF 2930 printer is stable.
  • Make sure the wifi network is active on the router and computer.
  • Keep the WF 2930 printer close to the wifi router.
  • Press the wifi button on the WF printer and do not leave it for a few minutes.
  • Then, press the wifi button on the wireless router within two minutes.
  • Do not leave the wifi router until the wireless light blinks.
  • Make sure the wifi network setup process is fully completed.
  • Finally, print a page as a sample.

Contact our team to help in the first-time setup of the EPSON Printer.

Call Now !

Epson WF 2930 Connect Printer Setup Utility

The basic method for setting up the Epson WF 2930 connect printer utility is:

  • Switch ON the Windows or Mac device and confirm it is stable.
  • Ensure the internet connection on the computer is safe.
  • Download the setup utility file for the Epson WF 2930 connect printer.
  • Open the printer connect utility file and move on with the on-screen steps.
  • Complete the process and open the WF 2930 printer utility software.
  • Move to the utility tab and choose the utility options per your requirements.
  • Continue and complete the process.

Epson WF 2930 Scan Utility

The instructions for Epson WF 2930 scan utility setup on the preferred computer are:

  • Actuate the desired computer and ensure its wireless network is active.
  • Search for the Epson WF 2930 scan utility setup file and find it.
  • Download the scan utility setup file on the computer.
  • Proceed with the standard set of procedures shown on the device.
  • Finish the Epson WF 2930 scan utility setup process.
  • Access the installed scan software and select the Scan Utility button.

Epson WF 2930 Fax Utility

The procedure for setting up the Epson WF 2930 fax utility is:

  • Move on to the computer connected to the Epson WF 2930 printer.
  • Make sure the wifi network is stable on the computer.
  • Download the Epson WF 2930 fax utility setup file on the device.
  • Click on the fax utility setup files two times and use the on-screen steps.
  • Finish the fax utility setup process and open it.
  • Finally, choose the shown “Fax Utility” option.

Epson Event Manager Software WF 2930

The Epson Event Manager software has a crucial role in using the Epson WF 2930 printer. It allows you to make use of all the features of the Epson WF 2930 printer including the scanning features. The scanning features include Scan as PDF, Scan to Email, Scan to PC, and much more.

epson printer support

How do I Install Epson Event Manager Software WF 2930?

The simple method for installing Epson Event Manager software WF 2930 on the computer is:

  • Power up the Windows or Mac device and confirm it is active.
  • Ensure the wireless network is active on the device.
  • Get the Epson Event Manager Software WF 2930 setup file.
  • Double-click on the installation file and move on with the on-screen steps.
  • Finish the Event Manager software setup process and open the software.
  • Then, move on to the Printers and Scanners section and choose- Start.
  • Access the Programs folder and choose the WF printer software.
  • Choose- Epson Manager and the printer name will be on the device screen.
  • Right-click on the WF 2930 printer and choose- Event with the scan option.
  • Select the Epson WF 2930 printer software on the device and finish the process.

Epson WF 2930 Scanner Setup

Epson WF 2930 Scan to Computer

  • Power up the Epson WF 2930 printer and open the printer scanner glass.
  • Place the document you need to scan on the WF printer scanner glass.
  • Select the Scan button shown on the Epson printer control panel.
  • Carry on and select- To Computer <JPEG> or To Computer <PDF>.
  • Move on with the on-screen procedure and choose the type of connection.
  • After that, go to the computer menu.
  • Then, access the WF printer and make sure it has a secure wireless network.
  • The scanning process starts; wait until the scanning process completes.

After scanning, the scanned document will get correctly saved on the computer.

Epson WF 2930 Scan Multiple Pages

  • Access the device (Windows or Mac) connected to the Epson 2930 printer.
  • Get the “Epson Scan to Software” setup file on the computer.
  • Run the setup file and move on with the wizard steps.
  • Finish the installation process and access the installed software.
  • Choose- PDF or multi-toff and change the scan settings as per the requirements.
  • Select the scan option and follow the procedure shown on the screen.
  • Lastly, scan several pages with the Epson WF 2930 printer.

Epson WF 2930 Scan to Emails

  • Initially, move on to the Epson WF 2930 printer.
  • Access the WF printer scanner glass.
  • Get the document you want to scan and place it on the scanner glass.
  • Choose the Scan button and click- To computer <email>.
  • Enter the Windows or Mac computer name if you want to select the wifi setup.
  • Carry on with the on-screen steps and complete the process.

Epson WF 2930 Scan Driver

  • Firstly, power up the Mac or Windows operating system.
  • Ensure the computer has no problem.
  • After that, ensure the wifi on the computer is active.
  • Save the Epson WF 2930 driver setup file on the computer.
  • Double-click on the driver setup files two times.
  • Follow the wizard steps and complete the scan driver setup process.
  • Access the scanning software and change the necessary scan settings.
  • Finally, try scanning with the Epson WF 2930 printer.

DMCA.com Protection Status