Epson WorkForce Pro WF-4740

The Epson Workforce Pro WF-4740 printer works well for all the demanding office prints. It works perfectly to take care of all the heavy-duty prints in the office. It is an all-in-one printer that brings the best quality output. For the quality of prints offered the Epson Workforce Pro WF-4740 is also considered to be economical. To be able to completely utilise the working of the Epson Workforce Pro WF-4740 printer setup, the installation of the Epson driver and connecting the printer to a wireless connection.

Follow the instructions mentioned below to assist in the process of setting up and installing the epson workforce pro wf-4740 driver. If for some reason the process is challenging, contact our team of experts to assist in the process.

Talk to Us !

epson workforce pro wf-4740 driver and wireless setup

Epson WorkForce Pro WF-4740 First time Printer Setup

    • Place the box of the printer in a safe spot.
    • Following this, remove the Epson Workforce Pro WF-4740 from the box.
    • Now, place the printer is on a safe and flat surface.
    • Ensure that when choosing the position of the Epson printer it is placed near the device and the router.
    • Remove the power cord from the printer box.
    • Connect one end of the power cord to the rear end of the Epson Workforce Pro WF-4740 printer.
    • Connect the other end of the power cord to the power supply and turn it on.
    • Fit in the Epson printer cartridges in the designated spot using the printer manual.
    • Place a bundle of fresh sheets of high-quality paper in the paper feeding tray.
    • Once the physical set-up is complete, proceed to move over to complete the download of the Epson Workforce Pro WF-4740 driver.
Epson Printer setup

Epson WorkForce Pro WF-4740 Driver Download

The Epson Workforce Pro WF-4740 driver should be downloaded to complete the set-up of the Epson printer. The process involves a few simple steps that should be followed. Visit the Epson Support Website and enter the details of the printer and follow the steps.

Epson WF-4740 driver – Windows

Follow the below steps to complete the download and the installation of the Epson Workforce Pro WF-4740 driver for a Windows device.

  • Once the physical setup of the Epson Workforce Pro WF-4740 printer is complete, move on to the next steps.
  • Power up the Windows device and open a suitable browser.
  • Enter the details of the Epson official website to download the Epson Workforce pro wf-4740 driver.
  • On the home page choose Drivers and Software from the menu tab.
  • Complete the prompts and instructions.
  • Enter the details as prompted. Choose the product type – printer.
  • Enter other details such as the printer model name – Epson Workforce Pro WF-4740.
  • Choose the operating system from the drop-down menu – Windows OS.
  • With the details entered, a list of drivers will appear. Click download on the most suitable one and proceed.
  • Download the file and locate the Epson Workforce Pro WF-4740 driver in the download bar.
  • Run the file to initiate the installation of the Epson WF-4740 driver.
  • Follow the instructions as prompted by the driver software.
  • Complete the steps and the final step would be to connect the Epson printer with a wireless network.

Epson Workforce Pro WF-4740 Driver – Mac

Complete the steps of downloading and installing the Epson Workforce Pro WF-4740 driver on a Mac device.

  • Power up the Mac and give it a few seconds before opening the Epson Support website.
  • Key in the details of the Epson website and follow the instructions.
  • Choose Drivers and Software to download the ​​Epson Workforce Pro WF-4740 driver.
  • Enter details as prompted on the Epson website.
  • Enter the printer model name – Epson Workforce Pro WF-4740 and the OS.
  • Choose the right OS from the drop-down menu – Mac OS.
  • Choose a suitable driver as displayed on the screen.
  • Initiate the download of the driver and locate the driver file in the download folder.
  • Run the Epson Workforce Pro WF-4740 driver to complete the installation. Follow all the instructions as prompted to complete it.
  • As the last step, the Epson printer will have to be connected to a wireless network.

Epson WorkForce Pro WF-4740 Wireless Setup

Connect Epson WorkForce Pro WF-4740 Printer to Wi-Fi

Connect the Epson Workforce Pro WF-4740 printer to a WiFi

    • After setting up the Epson printer and installing the driver, the final step will be to connect the printer to a wireless network.
    • Note that there is an active and stable wireless connection.
    • Following this, ensure that the wireless router is compatible with the Epson printer.
    • Make a note of the wireless network’s credentials to connect the printer and the wifi.
    • During the installation, the installation wizard will prompt you to connect to a wireless connection.
    • An option between a wireless connection or a USB will be given, choose wireless.
    • A list of available wireless connections will appear on the screen.
    • Choose the desired network connection as needed.
    • Enter the details of the wifi credentials and complete the process.
    • The connection will take place in a few seconds.
    • If the printer shows offline error, follow the Epson WF-4740 Troubleshooting steps.

Connect Epson WorkForce Pro WF-4740 Printer to Router

Here are the steps below that will assist in the process of connecting the Epson Workforce Pro WF-4740 printer to a wifi connection through a router.

  • Use the WPS push button option to connect the printer without the wifi credentials.
  • All that should be done is to locate the WPS Push button on the printer and the router.
  • Ensure there is an active and stable wireless connection to connect to.
  • With the Epson Workforce Pro WF-4740 printer powered up, proceed further.
  • Move over to the printers control panel and choose the Wifi icon, then move over to Network Settings.
  • Follow the steps to reach the WPS Push-button.
  • Move over to the Wifi router and locate the WPS Push-button.
  • Note that the WPS Push button on the printer and on the wifi router should be pressed at the same time.
  • The light on the Epson Workforce Pro WF-4740 printer and the WiFi router will flicker.
  • Give it a few minutes and the connection will take place.
  • Complete the process a few times if needed. The connection will take a short while to connect.

Call us for expert services to help troubleshoot the EPSON printer.

Call Now !

Epson WorkForce Pro WF-4740 Connect Printer setup Utility

If you do not wish to download an all-in-one Epson wokforce et 4740 printer driver, there is the option of downloading utility drivers based on preference and need. The process to download and install the driver is the same. Ensure that the details are entered accurately and the right utility driver is downloaded.

Epson WF 4740 Scan Utility

  • Power up the Epson Workforce Pro WF-4740 and the device.
  • On the device, open the Epson Support website.
  • From the home page, choose Drivers.
  • Enter the details of the WF-4740 printer.
  • Enter the model name of the printer.
  • Choose the right operating system – Windows OS or Mac OS.
  • From the list, choose Scanner Driver and then Epson Scan Utility.
  • Download the Scan Utility driver for Epson Workforce Pro WF-4740.
  • Run the file which can be located in the download folder.
  • This will initiate the installation of the Scan Utility.
  • Complete the steps as instructed and the driver can be used to make scanning simple and easy.

Epson WF 4740 Fax Utility

  • Power up the Epson Workforce Pro WF-4740 and the device.
  • Enter the details of the printer on the Epson Support website.
  • The details that are required is the name of the printer – Epson WF-4740.
  • Select the right operating system – Mac OS or Windows OS.
  • Download the Epson Workforce Pro WF-4740 Fax Utility driver from the list.
  • Run the file to complete the installation. Once it is complete, open the Fax Utility.
  • To use it, open the Fax Utility, Utility tab and click Fax.

Epson Event Manager Software WF 4740

The Epson Event Manager Software WF-4740 is used for various devices to be able to use the scan feature in an Epson printer. This software will help in the process of taking scans. Settings can be made based on the preference of where the file should be stored. This Epson Event Manager Software assists in Scan to Email, Scan to Computer or Scan format of jpeg or pdf.

Epson Printer Support

How do I install Epson Event Manager Software WF 3733

Here are the steps that should be followed to complete the download and the installation of the Epson Event Manager Software WF-4740 printer

  • Turn on the Epson Workforce Pro WF-4740 printer and the device.
  • Open the Epson Support page to download the Epson Event Manager Software for the Epson Workforce Pro WF-4740.
  • Once the download is done, locate the file in the download folder.
  • From here, choose the file and initiate the installation process.
  • Follow the instructions as it appears on the screen.
  • Following this, open the file through the programs menu.
  • Choose Event Manager and then select Epson Scan.
  • Move over to the Control Panel on the device and then choose Devices and Printers.
  • Select the events tab and apply the settings and changes.

With this, you can now use the Epson Event Manager Software to take scans with the Epson Workforce Pro WF-4740 printer.

Epson WorkForce Pro WF-4740 Scanner Setup

Epson Workforce Pro WF-4740 Scan to Computer

  • Take the desired document that should be scanned and place it on the glass scanner.
  • Ensure that the document is aligned accurately for the best results.
  • Press Scan which will redirect to make changes in the scan preference.
  • Choose the format of the file – choose JPEG or PDF.
  • Click Scan again and the document will be saved.

Epson Workforce Pro WF-4740 Scan Multiple Pages

  1. To scan multiple pages the documents can be scanned in two ways.
  2. The set of documents can be placed on the scanner one by one.
  3. Or the documents can be placed on the automatic document feeder.
  4. The file format should be chosen. Multiple page scans generally will be saved as a PDF.
  5. Complete the scan settings and proceed to scan.
  6. Place the documents accurately for the best results.

Epson Workforce Pro WF-4740 Scan to email

  1. Place the document on the scanner and align it properly.
  2. Once the document is ready, press Scan.
  3. Make the settings as preferred.
  4. Choose the format type – pdf or jpeg.
  5. Then, move over to choose the scan type.
  6. Choose Scan to Email
  7. The file will be sent to the designated email that was set during the time of set up.

Epson Workforce Pro WF-4740 Scan Driver

  1. On the Mac or the Windows device, open the Epson Support Page.
  2. Enter the details of the printer – model name – Epson Workforce Pro WF-4740.
  3. Enter the operating system – Windows OS or Mac OS.
  4. Download and install the Scan Driver.
  5. Once the setup is done, open the Scan Driver.
  6. Place the document on the printer and then click Scan on the device.
  7. The file is now stored on a Windows or Mac device.

DMCA.com Protection Status